Today’s contemporary homes will normally have a 
more recent 4 power that is prong on the wall for the dryer to connect into. This really is now the typical in the us and is safer as compared to older 3 prong. Therefore, if you get a somewhat older dryer that nevertheless makes use of the 3 prong power cord, you could come across this predicament. Where do you turn? you have got 2 options…
Choice 1 – You can employ a professional electrician to install a fresh 4 prong cord on your own dryer. An electrician will often charge around $80 dollars to put in a new power cord in your dryer. Expert installation will not usually through the price of a unique 4 prong dryer cord. A 4 prong 30amp 250v dryer power cord will often price around $15 to $25 bucks it yourself if you buy. For you to buy the 4 prong dryer cord beforehand if you will be calling an electrician to install the cord, it may be cheaper. This could help you save around $40 bucks according to exactly what the electrician will charge for the power cord that is new.
Choice 2 – The other option would be buying a unique 4 prong dryer energy cable and do the installation yourself. When you have electrical experience this task should just take around thirty minutes. However we suggest to engage an electrician whenever coping with a scenario such as this. Then read on if using a professional electrician is not possible. Yourself, make sure to use a UL Listed 4 prong replacement dryer power supply cord with flanged spade terminals for easy and quick connections if you have to install the new dryer power cord.
This video to get an idea of what is involved to change the power cord yourself, first watch. Always disconnect energy when doing almost any repairs for an appliance!
- Buy the correct dryer energy cord.
- FOR PROTECTION: visit the dryer manufacturer’s web site and locate the wiring diagram on how best to connect the cable precisely. The replacement cord you bought might also have “How To Wire” diagram onto it additionally. The dryer may additionally state from the back exactly exactly what color and where in fact the cables link.
- Turn the breaker off into the dryer.
- Unplug the dryer cord from power.
- Get access to the dryer by sliding it down very carefully.
- Get behind the dryer and eliminate the terminal block access panel (little panel with often one screw securing it).
- Loosen the screws keeping the cable cables from the terminal block.
- Detach the old cable cables.
- Loosen the screws regarding the cable stress relief.
- Slip the old cord out and remove entirely.
- Slip the new power cord into place.
- Connect and tighten the new power cord wires from the terminal block properly and in line with the manufacturer’s suggestions.
- Fasten the screws in the cable stress relief (in the event that cord that is new a more recent stress relief, use that one as opposed to the old one).
- Reinstall the terminal block access panel.
- Plug dryer cable in to the wall outlet for the dryer.
- Switch on the breaker towards the dryer.
- Testing the dryer to be sure it operates and gets temperature.
three to four prong cord installation on an electric dryer